Bridgehill Fire Blanket Car Standard XL - Single Use

Bridgehill Fire Blanket Car Standard XL - Single Use

Introducing the Bridgehill vehicle fire blanket, an essential tool for first responders and safety professionals dealing with vehicle fires, especially in areas with a high concentration of cars. Designed to rapidly control and isolate fires in both fossil fuel and electric/hybrid vehicles, this car fire blanket provides an immediate solution for containing flames and toxic smoke, reducing the risk of further damage and exposure.

How to use the blanket:

Bridgehill recommends the blanket be deployed by at least two trained personnel wearing proper firefighting PPE and breathing apparatus. Here’s how:

• Unroll and center the blanket near the vehicle.
• Each responder grabs a handle and pulls the blanket over the vehicle in one controlled movement.
• Ensure it covers the car entirely, all the way to the floor, with no air gaps.

In windy conditions, it’s best to deploy with four people and tie a rope around the vehicle at floor surface to prevent the blanket from lifting.

How long should it stay in place?

• Electric vehicles: Leave the blanket on for at least 20 minutes and monitor temperatures using a thermal camera. Since thermal runaway can continue for up to 48 hours, leave the blanket on for at least one hour after propagation ends.
• Transport recommendation: Keep the blanket on during towing, secured with straps at ground level.

The manufacturer recommends not using water with Bridgehill Fire Blankets. Instead, let the blanket suppress the fire naturally. Lithium-ion batteries produce their own oxygen during thermal runaway, making water both unnecessary and dangerous.

Post-Incident Handling and reuse:

• After the fire is fully suppressed, drag the blanket away from the vehicle.
• If handling the blanket directly, be aware that it may be contaminated with carcinogens and hazardous materials. Anyone repacking or touching the blanket should wear full PPE and Respiratory Protection and follow proper decontamination protocols.
• While some Bridgehill blankets are technically reusable (up to 30 times under ideal conditions), many departments choose to send the blanket with the vehicle during towing and bill the cost to the vehicle owner’s insurance. This avoids potential exposure risks and ensures readiness with a fresh blanket.
• While some Bridgehill blankets are technically reusable (up to 30 times under ideal conditions), many departments choose to send the blanket with the vehicle during towing and bill the cost to the vehicle owner’s insurance. This avoids potential exposure risks and ensures readiness with a fresh blanket.
• If reusing, allow the blanket to fully dry before folding and storing. Minor damage like holes under 1 cm may not affect performance, but any major tears should be repaired using the included repair kit.
• Always refer to the specific blanket model’s usage guidelines, as some models (like the Lithium or Car Pro) may be single-use depending on the severity of the fire event.

Features of this electric vehicle fire blanket include:

• Red center stripe for easier deployment
• Red and yellow handles
• Red center markings on each side
• Isolate fire in electric vehicles
• Immediate isolation of toxic gases and smoke, protecting civilians from carcinogen exposure
• Isolate any small fire
• Suitable for larger vehicles, trucks, and SUVs
• Delivered in a smartbag

Size:

• 24.6ft. x 32.8ft.
• 92.5lb.

Ideal for:

• Fire Departments
• Parking garages
• Charging stations
• Ferries
• Gas stations
• Workshops
• Car dealers
• Tunnels
• Parking lots

The Bridgehill single-use vehicle fire blanket is a vital asset for first responders and safety professionals, offering a rapid yet effective means of controlling vehicle fires. With its user-friendly design, ability to contain fires and toxic emissions swiftly, and suitability for a wide range of vehicles, it is an indispensable safety tool across various settings. This electric car fire blanket ensures preparedness and protection, making it a must-have for fire departments, parking facilities, and any location where vehicles are present.

NEVER USE WATER UNDER THE FIRE BLANKET! Doing so can cause: Dangerous gas buildup, Explosion risk from hydrogen, Steam and pressure escalation, Re-ignition upon oxygen exposure.